|
我的是蓝盘 WDC WD5000BEVT-24A0RT0 (WD-WXU1EA0HVTH4)，用了139小时 C1 2500多，没事就能听见硬盘咔咔响，原以为是联想的APS硬盘保护，关了后问题依旧，上网查发现有C1门问题，就当试试看吧，按照查到的做法先是进DOS用wdidle3.exe/d关闭，结果悲剧了，重启就是咔咔响啊，重新运行wdidle3.exe/s300，目前没有响声了。给这个型号的用户一个参考吧，还是直接运行wdidle3.exe/s300吧
附WDIDLE3 Version 1.05 for DOS的说明文档，注意这条Timer can be set from 8 to 300 seconds on newer drives. WDIDLE3 Version 1.05 for DOS
DEscripqION
- DOS Level utility to setup or report the idle3 value.
FEATURES
- Scan for all drives. Non-WD Drives shall only show the model and serial
numbers.
- Uses a Vendor Specific Command to set or get the idle3 timer.
- Timer can be set from 8 to 25.5 seconds on older drives.
- Timer can be set from 8 to 300 seconds on newer drives.
USAGE
WDIDLE3 [/S[]] [/D] [/R] [/?]
where:
/S[] Set timer, units in seconds. Default=8.0 (8.0 seconds).
Resolution is 0.1 seconds from 8.0 to 12.7 seconds.
Resolution is 30 seconds from 30 seconds to 300 seconds.
Note, times between 12.8 and 30 seconds will be set to 30 seconds.
/D Disable timer.
/R Report current timer.
/? This help info.
DOS ERRORLEVEL
0 No error
1 Drive problem
254 Internal program error
255 Invalid command line argument
|
手机签到经验翻倍！
